Milestone Systems

Additional Information:

• Item Code: CRCO10R038HP57GL
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: IMMEDIATE

• Totally enclosed LED luminaire with high luminous efficacy
• LEDS and energy efficient driver
• Sturdy vandal resistant light grey polycarbonate body with polyurethane gasket
• LED grade UV stablized
• polycarbonate diffuser
• Sturdy polycarbonate clips for diffuser to housing
• Waterproof cable gland ensures good ingress protection

Additional Information:

• Item Code: LE20-491-XXX-57-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 weeks

• LD57 LED Tracklight Construction in die cast aluminium Powder Coated White
• Clear Glass 1 mm thick
• High power high lumen output LED
• High efficiency reflector optics
• Effective thermal management using aluminium casting
• Constant current driver
• Intergral track adaptor with special track locking system to ensure proper mounting on track

Additional Information:

• Item Code: LD57-251-024-30-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 weeks

Additional Information:

• Item Code: LM34-251-XXX-57WG1
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: IMMEDIATE

IP 65 high efficiency LED wellgla

Specially designed heat sink for faster and effective heat dissipation

Well built and rugged construction for all weather application

Dome shaped diffuser design enables maximum light distribution

• Rugged & light weight pressure die cast aluminum construction with dark gray finish
• Integral heat sink for better heat dissipation
• High power, high efficacy LED
• White powder coated internal reflector
• Thermally isolated driver and optical compartment
• Injection molded translucent white impact resistant polycarbonate diffuser
• Long life and heat resistant EPDM rubber gaskets
• Specially designed IP65 EPDM wire entry grommet
• Accessories pre-wired up to terminal block
• 5 way 10 Amps LILO connector for 1 sq mm incoming wire
• EPDM cable entry grommet suitable for power cable outer diameter up to 8.0mm
• Energy efficient electronic LED driver

Additional Information:

• Item Code: LE02-401-XXX-65-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 WEEKS

LE10

Industrial integral LED channel

• High efficacy and long life LEDs
• Sleek design in high quality polyester white precoated galvanized steel
• Soft contoured injection moulding plastic end caps
• High Efficiency Translucence (HET) diffuser
• Easy installation by using snap brackets

Additional Information:

• Item Code: LE14-491-XXX-57-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 weeks

• Specially designed wave-shaped radial heat sink ensures effective thermal management enhancing life of the luminaire
• New generation, chip-on-Board (COB) LED technology
• Enhanced efficiency with higher lumen/ watt (>100 lm/W)
• Better colour consistency and reliable performance
• IDEAL FOR GREEN BUILDINGS

  IrisLED combine to deliver energy efficient solution reducing the Light Power Density (LPD).

• Main Code	System Wattage (W)	Rated Voltage (V)	Mains Current (A)	Approx Weight (kg)	Case lot (in nos.)	IP
  LD71-101-XXX-65-XX	11	240	0.05	0.37	12	20
  LD71-121-XXX-65-XX	14	240	0.06	0.5	12	20
  LD71-151-XXX-65-XX	16	240	0.07	0.5	12	20

Additional Information:

• Item Code: LD71-151-XXX-65-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: Immediate

We offer Wipro LED strip Light. LS06 & LS26

IP 20 and IP 65 non-integral flexible LED strip light

Formz LED is high on energy savings upto 50% and ensures longer life than a conventional lamp source

Minimal heat generation from the strips avoids blackening in coves

FormzLED is used to highlight different shapes and areas of cove

Freedom from lamp and accessory replacement makes FormzLED maintenance free

• Solid state high brightness SMD LED chips
• Available in LED power of 4.8W per meter and 14.4 per meter versions
• Can be cut at marked intervals to suit desired lengths
• LS06 series with IP 20 is suitable for indoor applications and LS26 series with IP 65 rating is suitable for outdoor applications
• Long life span of LEDs
• View angle of 120 degree
• Suitable driver to be ordered separately
• Designed for installation by adhesive back peel for easy installation

Additional Information:

• Item Code: LS06-005-120-BL-50
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: IMMEDIATE

• Extruded aluminium powder coated housing with pressure die-cast end caps
• Edge lit optics derived from reflector + light guide plate + diffuser configuration
• Low wattage high efficiency LEDs
• Excellent heat dissipation through direct contact
• CRCA powder coated control gear housing
• Conforms to IS 10322 / Part 5 /Sec 1: 1987

Additional Information:

• Item Code: LM77-441-XXX-57
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 weeks

• Iris LED SQLD74
• High efficiency square LED downlighter
• High power, high efficiency Chip-On-Board (COB) LED module
• High transmitivity, non-yellowing PMMA diffuser
• Pressure die cast aluminum housing, black powder coated for superior thermal performance
• Specially designed, easy to install mounting clips
• Driver pre-wired up to terminal block
• Suitable for Armstrong/CRG/TRAC/USG/Celotex/POP modular ceiling system

Additional Information:

• Item Code: LD74-151-XXX-65-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: Immediate

We offer Wipro LED Light - Recess Mounted Downlighter (LD71)

India’s best LED downlighter gets even better

• IrisLED Gold range includes uniquely designed products that enliven the ambience making it even more welcoming without compromising on the quality of light and ensuring saving up to 65% energy
• Wider light distribution
• No dark ceilings
• High power high efficiency Chip-On-Board (COB) LED module
• High Efficiency Translucence (HET) diffuser
• White powder coated, pressure die-cast aluminium with superior thermal performance
• Aesthetic white rim in engineering plastic
• Specially designed, easy-to-install mounting clips
• Best-in-class driver pre-wired up to terminal block
• Suitable for POP/ Armstrong modular ceiling system

Additional Information:

• Item Code: LD71-121-XXX-65-DD
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 weeks

• Flameproof Weatherproof Led Well Glass Upto 70 Watt
• Flameproof Weatherproof Bulk Head Light
• Flameproof Weatherproof Well Glass Fitting
• Flp Wp Clean Room Switch Socket
• Flp Wp Clean Room Rotary Switch & Isolator
• Flp Wp Push Button Station
• Flameproof Weatherproof Hooter

Additional Information:

• Item Code: LC20-411-XXX-57-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 weeks

LL13

High efficiency LED linear lamp

• High efficiency LEDs for optimum light output and savings in power
• Specially designed aluminium housing for excellent heat dissipation
• Excellent design ensures uniform lighting and avoids direct view of LEDs
• Short circuit and surge protection for enhanced reliability and longer service life of driver

Additional Information:

• Item Code: LL13-181-65
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: immediate

Post Top LED has a vintage and classy look which makes the ambience aesthetically appealing

Specially designed diffuser provides a uniform light which gives a pleasing experience

High efficacy LEDs ensure optimal output and maintenance free long service life

• Die cast Aluminum housing in Pure Polyster UV resistant powder coated grey finish.
• Top maintainable product with top opening die cast cover
• Anti-corrosive stainless steel screws & silicon gasket
• HET PMMA diffuser
• IP65 Protection.
• Driver duly wired up to terminal block.
• Conforms to IS 10322 Part 5 / Sec 1 : 1987
• Luminaire is suitable for pole diameter of
• 65-75 mm. (Pole is not in Wipro's scope)
• Cable entry through pole from bottom.
• In- built electronic LED driver.
• 2 way 10Amps GFP mains connector

Additional Information:

• Item Code: LP02-501-XXX-57-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: Immediate

• Die cast aluminum, compact, aesthetic, pure polyester powder coated housing
• IP 67, optically sealed housing with toughened glass totally sealed using silicon gasket ensuring IP and lifelong performance
• High efficiency COB LED mounted on black anodised aluminum heat sink for effective heat dissipation
• Special high efficiency optical grade UV stabilized engineering plastic reflector
• Available in 10, 24, 36 & 55 deg. beam angle
• Inbuilt 2 stage, IP 67, CCCV electronic driver with 2kV (DM) surge protection
• Front maintainable with vandal resistant toughened glass giving access to driver and LED
• Anti corrosive stainless steel hardware facilitates maintenance
• Conforms to IS 10322 Part 5/ Sec.1:1987
• Complete with LEDs and driver pre-wired up to terminal block
• 2 way 10Amps GFP mains connector
• Directional shield, Wipro Cat No. FFX 511
• Earth spike in die cast aluminum, Wipro Cat No. FFX 512
• Cradle mounting

Additional Information:

• Item Code: LF05-450-055-27-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: Immediate

LM78

Linear suspended Up-down light LED luminaire

• Light weight with clean fit and finish
• Long life, no rusting
• Uniform light Distribution without glare
• Seamless linear lighting
• Easy Installation and long service life
• Quick and easy installation
• Uniform and optimum light output in 360 Deg
• Ideal Green Lighting Solution Comply for general purpose lighting
• Protection against insects and small items entry into luminaries for safety

Additional Information:

• Item Code: LM78-401-XXX-57
• Delivery Time: 2 weeks

CRLA11

LED Bollard light suitable for landscape lighting

• MS housing 2mm wall thickness & Black matt powder coated
• Special translucent PMMA milky tube for better Light Transmission
• High Luminous Flux imported LEDs for better light output
• Product is designed for IP 65 protection
• Electronic control gear duly wired up to the terminal block
• Designed and manufactured to comply with IS 10322 part 5/Sec 1 1987
• Designed to install directly on wall with the help of 4 screws

• Main Code	System Wattage (W)	Rated Voltage (V)	Mains Current (A)	Approx Weight (kg)	Case lot (in nos.)	IP
  CRLA11008HP27-08	8	240	0.037	3	1	65
  CRLA11008HP57-08	8	240	0.037	3	1	65
  CRLA11008HP27-05	8	240	0.037	2	1	65
  CRLA11008HP57-05	8	240	0.037	2	1	65

Additional Information:

• Item Code: CRLA11008HP27-05
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 WEEKS

High Mast Lighting – Overview

High Mast Lighting solutions are used where large public areas like expressways, railway yards, dockyards, road junctions, toll plazas, warehouses need to be illuminated. An efficient lighting solution, it is the most preferred way of illumination because it can achieve a high space to height ratio. A High mast pole is an ideal solution for large industries where open spaces must be illuminated.

High Mast lighting is currently the most efficient and cost effective way of illuminating large outdoor areas such as highways, railway yards, dock yards, parking lots, shopping centers, power plants, coal mines, warehouses, toll plazas and road junctions.

High Masts can be mounted at considerable heights, thus rendering uniform illumination to the entire area. It also enables easier installation and maintenance of luminaires due to motorized controls that lowers and raises the luminaires. The sleek high masts lighting is also aesthetically superior to the conventional lattice structures or lower height poles.

Features and Benefits of High Mast Lighting

Wipro Lighting takes special consideration when it comes to the high mast lighting design. Since high mast is installed at a considerable height; our high mast poles are designed with motorized controls that effortlessly lowers and raises the luminaires for maintenance purposes. High mast light specification is another determiner when illuminating large outdoor areas. With flexible marine grade stainless steel wire ropes that comply with AISI SS316 standards, the high masts are housed in a chassis and secured axially. Our high masts come with self-lubricating winches which are driven by a single speed reversible power tool in a self-sustaining mechanism. The entire range is available in standard heights ranging from 12 to 30 meters.

Wipro Lighting offers comprehensive range of solutions in High Masts. The range is available in standard heights,12/16/20/25/30 metres. All these options support various luminaire combinations depending on lighting design requirements.​​​​​​​

• High Mast Assembly
  The assembly is housed in a chassis and is secured axially. The pulley is made of non corrosive material and runs on self-lubricating bearings with stainless steel spindles. This complete assembly is hot dip galvanized.
• Wintches
  The double drum winch driven by a single speed reversible power tool is a self sustaining mechanism which does not get affected by weather or moisture. It is designed as a self lubricating winch by using oil bath.
• Lantern Carriages
  The lantern carriage is made of durable steel tube and serves the dual purpose of carrying luminaires as well as acts as an electrical conduit. It is provided with rubber gaskets internally which allows easy movement and avoids scratches on the Mast surface?during movement.
• Accessories
  Flexible marine grade stainless steel wire ropes (AISI SS316) are used in 7/19 construction in the Mast assembly. Accessories like trailing cable, cable connections, lightning arrester, power tool, feeder pillar box and aviation obstruction luminaire are provided with the Mast.

Additional Information:

• Item Code: HIGHMASTLIGHTS
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 MONTH

Additional Information:

• Delivery Time: 1 Week

• Construction in die cast aluminium Powder Coated White
• Clear Safety Glass
• High power high lumen output LED
• High efficiency reflector optics
• Effective thermal management using aluminium casting
• Constant current driver

Additional Information:

• Item Code: LD56-251-024-30-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2-3 years

We offer Wipro Landscape Urbano LED Pathway Light (LP 05).

Features:

• High-pressure Die Cast Aluminium alloy body and components.
• Luminaire is processed with anti-ageing electrostatic spray.
• Super resistance to corrosion.
• Polycarbonate cover, high strength impact resistance
• Conforms to IS 10322 Part 5 / Sec 1 : 1987
• Pole to be ordered separately
• Pole Dia 76mm

Additional Information:

• Item Code: LP05-711-XXX-65-XX
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 3 WEEKS

Wattage: 10 watts

Material: Polycarbonate, Color: Cool Day Light

Color Temperature: 6500K, Lumens: 1000lm; Brightest LED batten with efficacy upto 110 Lm/W

Slim design with decorative end cap. High performance diffuser for soft and glare free light

Additional Information:

• Delivery Time: immediate

Poles are the backbone of efficient street lighting applications and urban city beautification projects. Wipro Lighting offers a wide range of products right from 5m to 12m poles with different bracket options to meet the needs of the urban planners who find it necessary to accentuate the outdoors to maintain the right level of illumination that facilitates orientation in dark and meet the basic requirements of the residents and tourists.

Street Light Poles - Overview

Street light poles are the backbone of street lighting, and their use case extends from providing adequate lighting to the beautification of urban spaces. As a street light pole manufacturer, Wipro Lighting offers a wide range of street light poles, with mounting height ranging from 5m to 12m and different arm brackets.

Features and Benefits of LED Street Light Poles

Today, designers choose street light poles design that blends with the modern city landscapes to provide a more homogenous and distinguished look. Street light poles designaffects the lighting output, and there are other parameters like Mounting Height, Spacing, Outreach, Drag Coefficient and Pole Geometry which influence the choice of the poles. At Wipro Lighting, we offer several types of street light poles vis-à-vis Swaged Poles, Decorative Poles, Octagonal Poles in a wide range of mounting heights. Our street light poles design meets the IS2712: Part II specifications.

• Swaged Poles / Tubular Poles
  Swaged poles are the most popular streetlighting poles, even today. We offer the entire range of these poles with specifications confirming to IS2712: Part II.
• Decorative Poles
  This category of poles is the favorite of all designers. We offer a wide variety of customized options to suit your design creations. Please contact our lighting experts to explore more on this range.
• Octagonal Poles / Conical Poles
  Modern octagonal poles are sleek, elegant and aesthetic. They provide a low maintenance, long life solutions for streetlighting applications.

Additional Information:

• Item Code: POLES
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 2 WEEKS

Proper city lighting not only makes it aesthetically pleasing but also enhances its security. With a formidable amount of expertise in lighting, Bajaj provides end-to-end solutions for illuminating different parts of the city there by making it more livable. One of the Cityscape portfolio in the Luminaires segment of BEL includes Street lighting to address the varied lighting requirements in an entire city.

With BEL street lighting solution, create more secure areas around the city by increasing visibility at night.